BLINDBALANCE / OPERATOR CONSOLE
Check your pair, adjust feedback, and collect a short capture.
AUTHORIZED OPERATORS
Your individual access key opens only your assigned pair.
The key stays in memory until you sign out or close this page.
SHARED SETTINGS
Both arms must be fresh and use matching motor or piezo firmware. Changes are applied by the left arm, then confirmed by the right.
Connect both arms with matching motor or piezo firmware to control feedback.
Summaries save automatically while the boards are online, even with this page closed. No Start or Stop needed. History begins when cloud logging was enabled; missed offline windows cannot be recovered by the current firmware.
Choose a date to view saved summaries.
| Received at | Measured arm | Count | Distance (cm) | Feedback during window |
|---|
Left arm alerted / Right arm alerted means that board commanded vibration or beeps at some point during its 10-second window. No feedback means it commanded none; Not reported means the information is unavailable. This reports commands, not physically measured vibration or sound. Each row describes one board's own window. Times shown here use your local time; CSV timestamps use UTC and retain L/R/None/Unknown in the Alerted Arm column.
A pair command is applied only after both arms confirm. A failed or expired command may still have changed one arm; check each arm’s reported state.
Only finalized, verified uploads appear here. Clearing a local capture does not delete its saved copy.
Up to 3 minutes / approximately 2 MB. Stop before downloading or clearing.
Keep this arm still during recalibration.